SH100

 

Choose variant
Side-Power Twin Propellers

Twin Propellers

The twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.

 

 
Side-Power Sealed Drive Lifetime Lubricated

Sealed and lifetime lubricated gearleg

Sealed gearleg with long-life "mechanical" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.

  • "Mechanical" seals with surfaces of ceramic and carbon for ultimate security against water intrusion
 

 
Side-Power Q-prop™

Q-prop™

The new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.

  • Noise reductions of up to 75% measured in controlled environments
  • The expected and tested normal noise reduction in average installations: 20-40%
  • Will be delivered on all Side-Power models except models with 300mm and 385mm tunnel diameter
  • Upgrade kits are available for most SP series thrusters with special adaptors
Light duty thrust up to (kg · lbs) 100 · 220
Heavy duty thrust up to (kg · lbs) 80 · 176
Typical boat size (ft · m) 30 - 34 · 9 - 16
Tunnel I.D. (mm · in) 185 · 7.28"
Propulsion system Twin
Hydraulic power up to (kw · Hp) 6.9 · 9.3
Weight (kg · lbs) 9.0 · 19.8
Item Code SH100/185T-xxx

SH100 Tunnel Thruster

Measurements
A (mm • in) 185 • 7.28
B (mm • in) 195 • 7.64
B max. (mm • in) 212 • 8.34
C min. (mm • in) 200 • 7.87
D (mm • in) 170 • 6.70
D recommended (mm • in) 340 • 13.4
E min. (mm • in) 6 • 0.24
E max. (mm • in) 8 • 0.31
Stern Thrusters
F (mm • in) 172 • 76.72
G (mm • in) 256 • 10.08
C min. (mm • in) 150 • 5.91
H max. (mm • in) 35 • 1.38
Tunnel length (mm • in) 337 • 13.27
Item code:
Stern thruster kit 90086i
Cowls - short model 90075
Cowls - long model 90077
# Description Product
1 Propeller 7 1261
2 Propeller key 6 1241
3 Propeller washer 7 1181
4 Locknut 4 1260
5 Anode 7 1190 A
6 Gasket (between gearleg and tunnel) 8 0610
7 Drive shaft key 6 1440
8 Gearleg bolt 7 1080
9 Complete gearleg 8 0601
10 Complete motor bracket 8 0501
11 Rubber element 7 1451
12 Complete flexible coupling 7 1450
13 Adaptor plate 10 21301
14 Drive shaft key 7 1440
15 Hyd. Motor options:
15a U-06(6ccm) 72100/U-06
15b U-08(8ccm) 72100/U-08
15c U-10(10ccm) 72100/U-10
16 Hydraulic motor bolts 6 1360
17 Hyd. Motor assembly options:
17a SH100HYD motor, U-06, complete 72100UL2
17b SH100HYD motor, U-08, complete 72110UL2
17c SH100HYD motor, U-10, complete 72115UL2

The installer alone has responsibility for the installation of the spare parts. Side-Power only warranty the spare parts supplied only.

The information given in the document was correct at the time it was published. However, Sleipner Motor AS can not accept liability for any inaccuracies or omissions it may contain. Continuous product improvement may change the product specifications without notice. Therefore, Sleipner Motor AS can not accept liability for any possible differences between product and document.

File Type Language Download
Manual SH100-160-240-320-420-550.pdf Manual English  Download
IGS.fil SH100-185T-Uxx (simple version).igs Technical drawing English  Download
STP.fil SH100-185T-Uxx (simple version).stp Technical drawing English  Download
DXF.fil SH100-185T-Uxx.dxf Technical drawing English  Download
DWG.fil SH100-185-Uxx STERN.dwg Technical drawing English  Download
STP.fil SH100-185-Uxx STERN (simple version).stp Technical drawing English  Download
DXF.fil SH100-185-Uxx STERN.dxf Technical drawing English  Download
IGS.fil SH100-185-Uxx STERN (simple version).igs Technical drawing English  Download
Product specification sheet SH thrusters.pdf Product sheet English  Download