SH160

 

Choose variant

5 Variants

Side-Power PROportional

PROportional

A DC Speed Control system contains three main elements - proportional control panels, a power control unit and a DC electric thruster - all tied together with the new S-link™ control system. The thrusters used in a speed control system are almost identical to the familiar SE range of DC thrusters, the only difference being the addition of a temperature sensor and a new electronic control box. All mechanical and main electric parts are from the well proven thruster range produced by Side-Power for many years.

All 12 & 24 volt DC electric thrusters produced by Side-Power can be enabled for DC Speed Control by authorized Side-Power service personnel, even the oldest models.


Side-Power S-link™

S-link™

S-link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.

  • Round, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup
  • Unlimited number of commands or information transferred on a single cable
  • User feedback at panel
  • Intelligent troubleshooting

Side-Power Q-prop™

Q-prop™

The new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.

  • Noise reductions of up to 75% measured in controlled environments
  • The expected and tested normal noise reduction in average installations: 20-40%
  • Will be delivered on all Side-Power models except models with 300mm and 385mm tunnel diameter
  • Upgrade kits are available for most SP series thrusters with special adaptors

Side-Power Twin Propellers

Twin Propellers

The twin propeller system can give more thrust than a single propeller system in the same tunnel diameter. This is our choice for our mid-range models where high thrust is required in a small tunnel diameter. Due to the compact design and high performance, the twin models have become the thrusters of choice among boat builders around the world.


Side-Power Sealed Drive Lifetime Lubricated

Sealed and lifetime lubricated gearleg

Sealed gearleg with long-life "mechanical" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.

  • Mechanical" seals with surfaces of ceramic and carbon for ultimate security against water intrusion
Light duty thrust up to (kg · lbs) 160 · 352
Heavy duty thrust up to (kg · lbs) 140 · 308
Typical boat size (ft · m) 35 - 62 · 11 - 19
Tunnel I.D. (mm · in) 215 · 8.46
Propulsion system Twin
Hydraulic power up to (kw · Hp) 10.0 · 13.4
Weight (kg · lbs) 10.5 · 23
Item Code SH160/215T-xxx

A (mm · in) 215 · 8.46
B (mm · in) 195 · 7.64
B max (mm · in) 230 · 9.05
C min (mm · in) 215 · 8.46
D (mm · in) 280 · 11.0
D recommended (mm · in) 560 · 22
E min. (mm · in) 6 · 0.24
E max. (mm · in)) 8 · 0.31
# Description Product
1 Propeller 9 1261
2 Propeller key 9 1241
3 Propeller washer 20 1181
4 Locknut 10 1260
5 Anode 20 1180 A
6 Gasket (between gearleg and tunnel) 9 1355
7 Drive shaft key 10 1440
8 Gearleg bolt 10 1080
9 Complete gearleg 10 0600
10 Complete motor bracket 9 0500
11 Rubber element 20 1459
12 Hub flexible coupling 20 1458
13 Complete flexible coupling 10 1450HYD
14 Adaptor plate 10 21301
15 Drive shaft key 7 1440
16 Hyd. Motor options:
16a U-06(6ccm) 72100/U-06
16b U-08(8ccm) 72100/U-08
16c U-10(10ccm) 72100/U-10
16d U-11(11ccm) 72100/U-11
16e U-14(14ccm) 72100/U-14
17 Hydraulic motor bolts 6 1360
18 Hyd. Motor assembly options:
18a SH160HYD motor, U-06, complete 72100UL2
18b SH160HYD motor, U-08, complete 72110UL2
18c SH160HYD motor, U-10, complete 72115UL2
18d SH160HYD motor, U-11, complete 102100UL2
18e SH160HYD motor, U-14, complete 72114UL

The installer alone has responsibility for the installation of the spare parts. Side-Power only warranty the spare parts supplied only.

The information given in the document was correct at the time it was published. However, Sleipner Motor AS can not accept liability for any inaccuracies or omissions it may contain. Continuous product improvement may change the product specifications without notice. Therefore, Sleipner Motor AS can not accept liability for any possible differences between product and document.

File Type Language Download
Manual SH100-160-240-320-420-550.pdf Manual English  Download
Product specification sheet SH thrusters.pdf Product sheet English  Download
CAD-files & technical drawings

3D models & technical drawings
for industry professionals

At Sleipner, we have shared our knowledge and technology with naval architects and boat builders for over a century. Now, we have also decided to open up our complete library of .cad, .igs, .dwg, .dxf, .stp, .xt, .pdf files and more.

Get access to 1000+ CAD files