Choose variant

6 Variants

Side-Power PROportional


A PROportional speed controlled thruster system allows for more precise handling of the boat in all conditions, applying only the necessary power needed to complete your maneuver confidently. By limiting the power under normal weather conditions, noise levels are significantly reduced.

The system also includes a practical HOLD-function in a twin thruster system. With a single press of a button, the bow and stern thruster will keep you alongside the docks - making single handed docking very easy indeed! Proportional thrusters are also the best choice for joystick interaction.

Side-Power S-link™


S-link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.

  • Round, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup
  • Unlimited number of commands or information transferred on a single cable
  • User feedback at panel
  • Intelligent troubleshooting

Side-Power Q-prop™


The new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.

  • Noise reductions of up to 75% measured in controlled environments
  • The expected and tested normal noise reduction in average installations: 20-40%
  • Will be delivered on all Side-Power models except models with 300mm and 385mm tunnel diameter
  • Upgrade kits are available for most SP series thrusters with special adaptors

Side-Power Twin Counter-Rotating

Twin Counter-Rotating Propellers

Two counter-rotating propellers can give the most thrust at a good performance ratio in a minimal tunnel diameter. This system is used in our larger thrusters for maximum power. The TC models are the favourite thrusters among leading boatbuilders for their high-end yachts.

Side-Power Sealed Drive Lifetime Lubricated

Sealed and lifetime lubricated gearleg

Sealed gearleg with long-life "mechanical" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.

  • "Mechanical" seals with surfaces of ceramic and carbon for ultimate security against water intrusion
Light duty thrust up to (kg • lbs) 240 • 529
Heavy duty thrust up to (kg • lbs) 220 • 440
Typical boat size (ft • m) 42' - 75' • 13 - 23
Tunnel I.D. (mm • in) 250 • 9.8"
Propulsion system Twin Counter-Rotating
Hydraulic power up to (kW • hp) 14.9 • 20.0
Weight (kg • lbs) 15.9 • 35.0
Item Code SH240/250TC-xxx

Weight stated include thruster, props and bellhousing ONLY.

Weight of hydraulic motor (typical 25 - 40 kg) comes in addition.

Measurements Bow Thruster

Measurements Bow Thruster SH240/250TC
A (mm • in) 250 • 9.84"
B (mm • in) 213 • 8.38"
B max (mm • in) 230 • 9.05"
C min (mm • in) 230 • 9.05"
D (mm • in) 280 • 11"
D recommended (mm • in) 560 • 22"
E min (mm • in) 7 • 0.28"
E max (mm • in) 10 • 0.39"

Measurements Stern Thruster

Measurements Stern Thruster SH240/250TC
F (mm • in) 91 • 7.52"
G (mm • in) 340 • 13.39"
C min (mm • in) 250 • 9.84"
H max (mm • in) 60 • 2.36"
Tunnel length (mm • in) 350 • 13.78"
Stern thruster kit 90140i
Cowls - short model -
Cowls - long model 90132
# Description Product
1 Propeller 10 1271**
2 Propeller key 9 1241
3 Propeller washer 20 1181
4 Locknut 10 1260
5 Anode 20 1180 A
6 Oil drain screw with gasket 10 1220
7 Gasket (between gearleg and tunnel) 10 1312
8 Gearleg bolt 10 1440
9 Drive shaft key 10 1080
10 Complete gearleg 13 0602
11 Complete motor bracket 10 0501
12 Rubber element 20 1459
13 Hub flexible coupling 20 1458
14 Complete flexible coupling 10 1450HYD
15 Adaptor plate 10 21301
16 Drive shaft key 7 1440
17 Hyd. Motor options:
17a U-8 (8ccm) 72100/U8
17b U-10 (10ccm) 72100/U10
17c U-11 (11ccm) 72100/U-11
17d U-14 (14ccm) 72100/U-14
17e U-16 (16ccm) 72100/U-16
17f U-19 (19ccm) 72100/U-19
18 Hydraulic motor bolts 6 1360
19 Hyd. Motor assembly options:
19a SH240 motor, U-8, complete 72110UL3
19b SH240 motor, U-10, complete 72115UL3
19c SH240 motor, U-11, complete 102100UL2
19d SH240 motor, U-14, complete 102110UL2
19e SH240 motor, U-16, complete 102115UL2
19f SH240 motor, U-19, complete 102120UL2

The installer alone has responsibility for the installation of the spare parts. Side-Power only warranty the spare parts supplied only.

The information given in the document was correct at the time it was published. However, Sleipner Motor AS can not accept liability for any inaccuracies or omissions it may contain. Continuous product improvement may change the product specifications without notice. Therefore, Sleipner Motor AS can not accept liability for any possible differences between product and document.

File Type Language Download
(INSTALLATION MANUAL) (SH) (100, 160).pdf Manual English  Download
Product specification sheet SH thrusters.pdf Product sheet English  Download
(USER MANUAL) (SH).pdf Manual English  Download
CAD-files & technical drawings

3D models & technical drawings
for industry professionals

At Sleipner, we have shared our knowledge and technology with naval architects and boat builders for over a century. Now, we have also decided to open up our complete library of .cad, .igs, .dwg, .dxf, .stp, .xt, .pdf files and more.

Get access to 1000+ CAD files

Related products and categories