EX110 Dual 12V thruster

EX110 Dual 12V thruster
80-110kg thrust,On/Off


EX DUAL is equipped with two propellers and two motors and is available in two different versions for boats from 14 to 20 m in length and fits perfectly for both bow and stern installation.

For EX180D, we offer a Converter which can charge a 24V battery package for boats fitted with a 12V system onboard. 

Length: 98 cm; Ø: 16,5 cm, Weight: 35 kg

Model Effect (kW) Thrust (kg) Performance thrust* (Kg x 1.4) Voltage (V) Nom. current (A) Rec. Boat size (m)
EX110D 4.0 80 110 12 374 14 - 18
EX180D 6.0 130 180 24 350 17 - 20

* The experienced performance  can be as high as 1.4 times the actual thrust due to:

  • The installation position more towards the very bow of the boat ( 1 - 1.5 m ) the leverage increases by a minimum of 20%. (When used as bow thruster)
  • Long and small transverse tunnels reduce thrust, on an average length of 60 - 70 cm, around 20%.
  • Installation depth is 15-20cm (minimum) deeper under water (= no cavitation)

The total of these three main performance benefits results in a higher efficiency of an average 40% compared to conventional thrusters. It is important to notice this, when comparing to tunnel thrusters.

Measurements - EX serien - Dual

# Description Product
1 Propeller kit 50320
2 Anode kit 4 1190
3 Solenoid kit 41571124
4 iBox 102250-12V
5 Electronic Control box 6 1232 I
6 EX cable 6 1850
7 IPC interface cable 102252
8 End cap kit 137309
9 Seal kit EX 137318

The installer alone has responsibility for the installation of the spare parts. Side-Power only warranty the spare parts supplied only.

The information given in the document was correct at the time it was published. However, Sleipner Motor AS can not accept liability for any inaccuracies or omissions it may contain. Continuous product improvement may change the product specifications without notice. Therefore, Sleipner Motor AS can not accept liability for any possible differences between product and document.

File Type Language Download
Manual EX25-180 EN.pdf Manual English  Download
Product specification sheet_DC_thrusters.pdf Product sheet English  Download
CAD-files & technical drawings

3D models & technical drawings
for industry professionals

At Sleipner, we have shared our knowledge and technology with naval architects and boat builders for over a century. Now, we have also decided to open up our complete library of .cad, .igs, .dwg, .dxf, .stp, .xt, .pdf files and more.

Get access to 1000+ CAD files

Related products and categories